You are here

Repair of metal, concrete and rubber materials with coatings

Concrete surface coating

We offer industrial equipment repair and protection services applying coatings made up of epoxy resins, urethanes, polyurethanes and grease tapes.

We work with DEVCON products. The latter brand has a wide range of specialized products to fight against chemical contact, corrosion and abrasion on concrete surfaces.



  • Reconstruction and protection using highly-resistant Novlac polymers and polyurethanes against chemical attack of 98% sulphuric acid, 37% hydrochloric acid, 50% caustic soda and other chemicals.
  • Application to containment bunds, containers, foundations and other concrete structures subject to the most aggressive chemical contact.


Renovation of the floor which was damaged due to sulphuric acid spillage using DEVCON Epoxy Coat 7000 AR.

Detalle la solera dañada por ácido sulfúrico

Close-up image of the floor damaged due to sulphuric acid.

Preparación de la superficie de hormigón a reparar

Preparation of the concrete surface to be repaired.

Aplicación de Epoxy Coat 7000AR con alta resistencia a ácidos

Application of Epoxy Coat 7000 AR which is highly resistant to acids.

Renovation of contaminated concrete in the containment bund where hydrocarbons are loaded and unloaded using DEVCON Ultra Quartz chemical protection and levelling mortar.

Preparación del hormigón dañado para la aplicación del revestimiento

Preparation of the damaged concrete for applying the coating.

Aplicación del mortero DEVCON Ultra Quartz

Application of DEVCON Ultra Quartz mortar.

Estado final de la rehabilitación del hormigón

Finished state after renovation of concrete.


Advantages of our service:

technical advice

We advise you on the use of resins and urethanes to solve any wear and tear problems due to corrosion, cavitation and abrasion.

product range

We have a wide range of products for repairing steel, aluminium, titanium, stainless steel, bronze and rubber materials.

guaranteed brands

The products Sintemar uses are guaranteed by their internationally renowned manufacturers.

own stock

We have own stock for both turnkey projects and supplying products quickly.


We offer on-site support, training and advisory services. We also have procedures and videos of the applications at your disposal.

turnkey service

We renovate industrial equipment which has been damaged using cold welding techniques at our workshop or at the client´s facilities.

Do not hesitate to contact us so we can inform you about the turnkey repair and protection services we provide.